Ph : +91 - 9810304214, 9716960296 E-mail :

Air Band IC A24

Brand : Icom
Product Code : IC A24
Download Specification : Download Catalogue
Easy to use while flying
Simple one-handed operation is the most essential feature of the IC-A24/A6. The well labeled, large keypad provides user friendly operation. The large display shows both letters and numbers and is easy to see, making for fast frequency recognition. The display is backlit, and so is the keypad. The light stays on until you turn it off – a very handy feature for flying at night.

"Flip-flop" channel recall
The IC-A24/A6 stores the last 10 channels used. You can easily recall those channels by pushing the "flip-flop" recall buttons on the front panel. It is convenient for switching between several channels, such as NAV and COM channels.

VOR navigation*
CDI mode display The IC-A24 has VOR navigation functions. The DVOR mode shows the radial to or from a VOR station and the CDI mode shows the course deviation to/from a VOR station. You can also input your intended radial to/from the VOR station and show the course deviation on the display. In the USA version, the duplex operation allows you to call a COM channel, while you are using VOR navigation.

External DC power jack
An external DC power jack allows for operation with the wall charger, BC-110 or the cigarette lighter cable, CP-20. When the battery pack is installed, simultaneous charging during operation is also possible. In addition, an optional battery case, BP-208N, is available.

Water resistant construction
The water resistant construction provides reliable operation in wet conditions.

And more...
200 memory channels (20 Ch × 10 banks) with 6 character names Dedicated 121.5MHz emergency key
Side tone function allows you to hear your own voice via an external aviation headset.
Optional Ni-Cd and Li-Ion battery packs
NOAA marine weather channels
Tag scanning and memory bank scanning
ANL (Auto Noise Limiter) for noise reduction
Low battery alert

Frequency Coverage
118.000-136.975 MHz
108.000-136.975 MHz
161.650-163.275 MHz
118.000-136.975 MHz
118.000-136.975 MHz
161.650-163.275 MHz
AM (6K00A3E)
FM (16K0G3E)
Channel spacing 25 kHz
No. of memory channels 200 (20 Channels X 10 banks)
Power supply requirement 7.4/7.2V DC (Battery pack)
11.0V DC (External DC jack)
Current drain (at 7.2 V DC)
Rx Max. audio
Rx Stand-by
1.5 A typical
300 mA typical
70 mA typical
Frequency stability ±5 ppm
Operating Temperature Range -10°C to +60°C; -14°F to +140°F
Dimensions (W×H×D)
(projections not included)
54(W) x 129.3(H) x 35.5(D) mm;
21/8(W) ×53/32(H) × 113/32(D) in
Weight 430 g; 15.2 oz (with antenna and BP-210N)
Antenna connector 50Ω BNC type
Output power (at 7.2 V DC) 5.0 W typ. (PEP)
1.5 W typ. (CW)
Modulation system Low level modulation
Modulation limiting 70-100%
AF harmonic distortion Less than 10% (at 60% mod.)
Hum and noise ratio More than 35 dB
Spurious emissions More than 46dB (Except operating freq. ±62.5 kHz point)
Microphone impedance 3-conductor 2.5 (d) mm (1/10″) / more than 100kΩ
Intermediate frequency
30.05 MHz
450 kHz
Sensitivity (typ)
VOR (AM 6dB S/N)
COM (AM 6dB S/N)
Less than 0.71 µV
Less than 0.5 µV
Less than 0.22 µV
Selectivity More than 7.5 kHz/-6 dB
Less than 25 kHz/-60 dB
Hum and noise ratio More than 40 dB
Spurious response
More than 60 dB
More than 30 dB
Audio output power More than 500mW typ. with an 8Ω load, 30% modulation
Ext. speaker connector 3-conductor 3.5 (d) mm, (1⁄8″) / 8Ω

Design by : Xantatech