Ph : +91 - 9810304214, 9716960296 E-mail :

IC-F14 Walkie Talkie

Icom IC-F14 Walkie Talkie
Brand : Icom
Product Code : IC F14
Download Specification : Download Catalogue
The IC-F14/S series shows Icom's new direction in LMR radio design. Simple operation for everyone but a powerful and reliable tool for your daily business. Its very durable construction is resistant to shock and vibration. The dual rail guide design securely locks the battery pack to the radio. Wide range frequency coverage, Li-Ion battery pack, loud and clear audio, built-in signalings and option unit connector combined with Icom grade electrical performance, the IC-F14/S series will easily exceed your expectations.

Tough and reliable construction
The IC-F14/S series is built around an aluminum die-cast chassis and covered with tough polycarbonate casing. This radio is built to last. Its dual slide rail securely locks the battery to the radio. The battery terminal is covered with a non-corrosive rubber packing. The belt clip is clamped between the radio and the battery, making it nearly impossible to knock loose.

Simple operation
Having only 3 buttons, volume and channel knobs, the IC-F14/S series does not require special training to use. Positive button action for sure operation even when wearing gloves, allows you to get down to the business of communicating without fuss.

Wide frequency coverage
The IC-F14/S series covers a wide frequency range with one version (136–174, 400–470, 450–512 (520) MHz). Wide and narrow channel spacing (25, 12.5kHz) is programmable per channel.

Lithium-Ion battery standard
The IC-F14/S series comes with a high capacity 2000mAh Li-Ion battery pack, BP-232N, as standard. Li-Ion batteries have virtually no memory issues and allows you flexible charging.

Optional board
The IC-F14/S series has an expansion socket for adding an optional board. Voice scrambler, man down and DTMF decoder features are available, depending on the installed board.

Most popular signalings built-in
Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups and quiet stand-by when others are talking.

Multiple 2-Tone, Multiple 5-Tone
Up to 10 2-Tone/8 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code.
Beep sound
Answer back
LED blink

Other features
LED Low battery alert
TOT function and lock out penalty timer
2 step power saver
Normal and priority scan
500mW loud and clear audio
Optional VOX headset for hands free operation
PC programming capability
Embedded ESN (Electronic serial number

Frequency coverage IC-F14/F14S
136 – 174 MHz (U.S.A. and General)
400 – 470 MHz (U.S.A. and General)
450 – 512 MHz (U.S.A.)
450 – 520 MHz (General)
Number of channels 16 (IC-F14, IC-F24)
4 (Max.,IC-F14S, IC-F24S)
Channel spacing 12.5KHz/25 kHz
PLL channel step 2.5 kHz, 3.125 kHz (VHF)
5KHz, 6.25KHz (UHF)
Power supply requirement 7.2V DC
Current drain Transmit Receive (at 7.2V DC; approx.) High 1.5A Low (1W) 0.7A stand-by 70mA rated output 300mA
Antenna impedance 50Ω
Usable temperature range –30°C to +60°C
–22°F to +140°F
Dimensions (with BP-231)
(projections are not included)
53 (W) ×120 (H) ×38 (D) mm 23⁄32 (W) ×423⁄32 (H)×11⁄2 (D) in
Weight (approx. with BP-231) 260g; 9.2oz
Output power 5W (VHF), 4W (UHF)
Max. frequency deviation ±5.0/2.5 kHz (Wide/narrow)
Frequency error ±2.5ppm
Spurious emissions 80dB typ.
Adjacent channel power VHF UHF 80/70dB typ. (Wide/narrow)
75/68dB typ. (Wide/narrow)
FM Hum and Noise 46dB typ. (Wide)
40dB typ. (Narrow)
Audio harmonic distortion 3% typ. (AF 1kHz, 40% deviation)
Modulation limiting 60–100% of max. deviation
External microphone connector 3-conductor 2.5 (d) mm (1⁄10″)/2.2kΩ
Sensitivity 0.25μV typ. (at 12dB SINAD)
Squelch sensitivity 0.25μV typ. (at threshold)
Adjacent channel selectivity 75dB typ. (Wide)
65dB typ. (Narrow)
Spurious response 70dB
Intermodulation 74dB typ.
Hum and noise ratio 50dB typ. (Wide) 45dB typ. (Narrow)
Audio output power 500mW typ. (at 5% distortion with an 8Ω load)
External speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/8Ω

Design by : Xantatech